GBP (£)
Code: 27-1012H
Code: 27-1012H
MORSO Mitring Machine EH
Loading...
MORSØ - EH Miter Machine Automatic electric/hydraulic Dust free operation - No compressor needed Faster and safer than double miter sawsDust free operation No compressor needed Exact 45° degree cut Noise level below 70dB
MORSØ-EH is a fully automatic, electric/ hydraulic miter machine with a dual hand release. This makes the machine completely safe as it is impossible to operate the machine and touch the knives at the same time. It cuts all kinds of wood, plastic, MDF and plywood. With MORSØ-EH you achieve a clean, smooth cut by automatically cutting the workpiece in minimum two cuts. The cutting time varies from 1 second and up, depending on the thickness of the workpiece. Having finished the cutting, the knife block automatically returns to the starting position. The starting position (horizontal movement) is adjustable up to 60mm/2 1/2” (Maximum width of workpiece is 100mm/4”). From 60mm and up, the MORSØ-EH will automatically cut the workpiece bit by bit. The adjustment is made by a handle on the front of the MORSØ-EH. The vertical movement of the knife block is also adjustable with three different heights, depending on the thickness of the workpiece (small, medium or large). These adjustments allow the MORSØ-EH to give you a clean and more constantly accurate cut. MORSØ-EH is CE approved.
MORSØ-EH is delivered with: • dual hand release operation • safety guard • sliding longitudinal stop • second stop • waste chute • extension table on the left side • measuring scale up to 1,500 mm/60” • adjustable fences (45-90°) • adjustable and automatic rabbet supports • adjustable hydraulic clamping cylinders MORSØ-EH is available either with a single or three phase motor with voltage set to your requirements.
MORSØ-EH is delivered with: • dual hand release operation • safety guard • sliding longitudinal stop • second stop • waste chute • extension table on the left side • measuring scale up to 1,500 mm/60” • adjustable fences (45-90°) • adjustable and automatic rabbet supports • adjustable hydraulic clamping cylinders MORSØ-EH is available either with a single or three phase motor with voltage set to your requirements.
MORSØ-EH is a fully automatic, electric/ hydraulic miter machine with a dual hand release. This makes the machine completely safe as it is impossible to operate the machine and touch the knives at the same time. It cuts all kinds of wood, plastic, MDF and plywood. With MORSØ-EH you achieve a clean, smooth cut by automatically cutting the workpiece in minimum two cuts. The cutting time varies from 1 second and up, depending on the thickness of the workpiece. Having finished the cutting, the knife block automatically returns to the starting position. The starting position (horizontal movement) is adjustable up to 60mm/2 1/2” (Maximum width of workpiece is 100mm/4”). From 60mm and up, the MORSØ-EH will automatically cut the workpiece bit by bit. The adjustment is made by a handle on the front of the MORSØ-EH. The vertical movement of the knife block is also adjustable with three different heights, depending on the thickness of the workpiece (small, medium or large). These adjustments allow the MORSØ-EH to give you a clean and more constantly accurate cut. MORSØ-EH is CE approved.
MORSØ-EH is delivered with: • dual hand release operation • safety guard • sliding longitudinal stop • second stop • waste chute • extension table on the left side • measuring scale up to 1,500 mm/60” • adjustable fences (45-90°) • adjustable and automatic rabbet supports • adjustable hydraulic clamping cylinders MORSØ-EH is available either with a single or three phase motor with voltage set to your requirements.
MORSØ-EH is delivered with: • dual hand release operation • safety guard • sliding longitudinal stop • second stop • waste chute • extension table on the left side • measuring scale up to 1,500 mm/60” • adjustable fences (45-90°) • adjustable and automatic rabbet supports • adjustable hydraulic clamping cylinders MORSØ-EH is available either with a single or three phase motor with voltage set to your requirements.
